|
|
 | Front Paddock Stand
Paddock Stand Front Heavy Duty with Under-Fork Adaptors.
Price: £43.99 |
|
|
 | Front and Rear Paddock Stand Set
Paddock Stand Front Heavy Duty with Under-Fork Adaptors.Paddock Stand Rear extra heavy duty red finish reinforced complete with wheels, suitable for Superbike use
Price: £59.99 |
|
|
 | Biketk Front Head Stand
The biketek front head stand folds out to enable a motorcycle to be lifted by the front steering head tube. This offers maximum access to the front end for all repair, cleaning and maintenance work.
Each stand is supplied with a kit of 5 of the most popular sized head lift pins, including 13mm,15mm,16.5mm,17mm and 18mm.
Other larger size pins are available to purchase separately (Select Below).
Price: £79.99 |
Front Head Stand Pins :
|
|
 | Single sided paddock stand
Side fitting paddock stands
Price: £69.99 |
Model :
|
|
 | Moto GP Rear Paddock stand
Heavy duty track and paddock stand for use with all twin-swinging arm motorbikes. Use to swiftly lift the rear wheel off the ground for work and repairs. Complete with cup adaptor kit (holds bike under the swinging arms).
Price: £44.99 |
|
|
 | Motrax Front Paddock Stand
Motrax GP Tyre Warmers Front/Rear
Motrax GP Tyre Warmers feature a digital controller for each warmer; this allows the tyres to be heated to the preferred temperature of the rider. The controllers can be programmed up to 100 degrees Celcius, however it is recommended to keep them between 75-85 degrees Celcius. Each controller can be set differently allowing total contorl.
Price: £49.99 |
|
|
 | Motrax Rear Paddock Stand
PADDOCK STAND (REAR)
• Made from heavy duty 38mm tubing
• Zinc coated to resist corrosion
• Double wheels for increased stability
• Dual support bracket for use with bobbins or flat swingarm’s
• Slide handle to minimise space required by stand
The Motrax rear paddock stand is more than strong enough to cope with any motorcycle. With dual brackets the stand can be used with bobbins, raisers or straight onto the swing arm. The slide handle gives excellent leverage and can then be slid under the rear wheel to reduce space once the bike has been elevated.
Price: £49.99 |
|
|
 | Aluminium Rear Paddock Stand
PADDOCK STAND (ALUMINIUM)
Aluminium Rear paddock stand
Made from light weight yet heavy duty aluminium
High performance single wheels
Incorporates fork style cups for use with standard bobbins
Optional adapters for use with DHM Raisers are available
Price: £79.99 |
|
|
 | Tailswinger
The TailSwinger is a new product designed to easily move a motorcycle in a swinging motion. The front tire stays put while the rear swings. It’s perfect for parking in tight spaces where a rider would have to rock the bike back and forth many times to get into place. It can also be used to swing a bike around 180 degrees. Drive on, swing over, ride out !
* Works on Cruisers, Touring, or Sport.
* For use in a garage, storage unit, or trailer.
* Simply drive the rear wheel onto the TailSwinger and swing it in or out of place.
* Loading platform is very low, stays put when loading / unloading.
* Keep the front wheel in virtually the same spot, move only the rear wheel.
* Made from an alloy that won’t bend, break or rust.
* Supports up to 1000 pound bike
PLEASE NOTE: This item is currently out of stock, delivery expected in mid October
Price: £69.99 |
|
|
 | Wheel Spin
Fed up with pushing your bike back and forth to lube the chain and clean the wheels ? Wheel-Spin is designed to be the perfect solution to this problem. This clever piece of kit enables the user to freely rotate either wheel whilst the bike is parked on its side stand. Place it on the floor in front of your wheel, push the wheel on top of Wheel-Spin rest the bike on its side stand and you can turn your wheel. Adjustable to suit all tyre sizes and small enough to keep with you. This device may not work on machines fitted with trail type tyres.
Price: £35.99 |
|
Home
